Avermedia SA6000E Pro User Manual download pdf (Page 67)

4.9.12 Missing, Suspicious Object, and Scene Change Detected

- Missing Object

Select the certain object on the screen for the system to detect; when the object is disappear or move

and the system will alarm. Click OK to exit and save the configuration. To exam the setup condition, click

Start Test.

1. Select the camera number (0-16) and press RIGHT button on the mouse to call up the setup

windows.

2. Click Save to capture the image for comparing reference first. To view the captured image, enable the

Show Reference Image check box. The captured image will display on screen. The reference image

is sharing with the Suspicious Object and Scene Change function.

3. Mark the Enable check box to setup the condition.

4. Use the mouse to click and drag the frame on the screen. User can drag more than one frame.

5. Sensitivity: Set the system detects sensitivity.

6. Delay Time: Set the lasting time for system to detect the object.

7. To reset all object frames, click Clean. To clean an object frame, click right button of mouse and drag

the object frame that user want to clean.

- Suspicious Object

Suspicious Object is including the object missing or the doubtful object appears on the screen. Click OK

to save and exit the setup windows. To exam the setup condition, click Start Test.

1. Select the camera number (0-16) and press right button on the mouse to call up the setup windows.

And then, click the Suspicious Object Tab.

2. Click Save to capture the image for comparing reference. To view the captured image, enable the

Show Reference Image check box. The captured image will display on screen. The reference

image is sharing with the Missing Object and Scene Change function.

3. Mark the Enable check box to setup the condition.

4. Sensitive: Set the system detects sensitivity.

5. Delay Time: Set the lasting time for system to detect the object.

6. Use the mouse to click and drag the frame on the screen.

• Maximum_Object: the maximum detect size. The objects are out of the maximum detect area

will be disregard. Use mouse to click and drag the frame on the screen.

• Minimum_Object: the minimum detect area. When the objects are smaller than the minimum

detect area, the system will disregard. Use mouse to click and drag the frame on the screen.

7. Enable Mask

Mark an area on the screen to disregards the motion in the marked area and to only monitor

outside the marked area. Mark the Enable Mask check box, click and drag the mask frame on the

screen.

8. To reset all object frames, click Clean. To clean an object frame, click right button of mouse and

drag the object frame that user want to clean

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 114 115

No comments

Avermedia SA6000E Pro User Manual Page 67