Avermedia SA6000E Pro User Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 115
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
47
4.4 Network Setting
In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible
via internet using WebViewer, Remote Console, PDA Viewer and Hand Viewer (still image). To select all the
cameras, enable the ALL check box.
(3) Server IP
Set the Server IP and Remote Console Port number. The system will automatically detect your Server IP
address. You need this when accessing DVR server from the remote location via internet.
(4) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http://
ddns.avers. com.tw and
register.(also see
Appendix A) You will be prompted to enter CD key number, product name, password, and
user information. Use this service if the IP address changes each time when you connect to internet.
(5) Remote Control Server
Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port in
Port column. The default value is 5555.
i
User also can manually run this function. To run, click
Start
>
Programs
>
DSS
>
Tool
>
Remote
Control Server
. The
remote control server icon appears on the taskbar when the remote
control server is enabled. (also see
Chapter 11)
(6) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust
bar to set the Quality level and FrameRate level.
(7) Webcam Port
Activate Enable Anonymous Login to remotely access the DVR server without the need of password and
Talk to Web-Client to use the 2-Way Talk feature that allows the client and server to talk via internet using
microphone. Make sure both microphone and speakers work before using this feature.
If the Talk to Web-Client is disabled, the person in the DVR server side can only hear the voice from the
client side that is when the WebCam 2-Way Talk button is activated. (see also
Chapter 7.1 #6).
i
Make sure that your Webcam Digital Signature is updated yearly; else you won’t be able to access
the DVR server from the DVR WebViewer. To update/download your WebViewer Digital Signature,
click Update WebViewer Digital Signature. Make sure your PC is connected to internet.
(8) Voice Phone
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 114 115

Comments to this Manuals

No comments