Avermedia SA6000E Pro User Manual download pdf (Page 41)

9. When done, click OK to save the setting or Click Cancel, to leave without saving the new setting.

3.11.2 Setup the IP PTZ Camera

1. In the PTZ control panel, click Setup.

2. When the PTZ Setup dialog box appears, click IP PTZ tab.

3. Select the camera number and check the Use PTZ box.

4. In the Connection Settings section, select the Protocol where the PTZ camera is connected and IP

Camera Site that IP or URL of IP camera. Then, click Save to keep the settings.

5. Use the IP PTZ control panel and adjust the position of the IP PTZ camera.

6. In the Preset Setting section, select the preset number to assign a number for the IP PTZ camera

current position. Set the DwellTime (1-60 sec) for how long the IP PTZ camera stays in that position

before it moves to the next one. If you want to add description, check the Show Preset Name box and in

the Preset Name text box, type the word. When done, click Save to keep the settings.

7. Repeat step 4 & 5, if you want to save another PTZ camera position.

8. Restore AutoPan Time: set a time period for restoring auto path function after the IP PTZ camera has

been moved. Mark the check box and set the time period in second.

9. Click Advanced Settings to enable the on screen PTZ control function. Mark Enable check box to

enable the control arrow and tools on the Preview screen. The user can click the arrow on the screen to

control PTZ camera direction. Mark the Always on of Display Mode, the control arrow and tools will

always show on the screen. The Transparency level means the visibility of PTZ control arrow and tools

on screen.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 114 115

No comments

Avermedia SA6000E Pro User Manual Page 41