Avermedia SA6000E Pro User Manual download pdf (Page 36)

3.5 Function Buttons in PTZ Camera Controller

Name Function

(1) Close Exit PTZ camera controller.

(2) Setup Configure PTZ cameras.(see Chapter 3.11)

(3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset

position number.

(4) Focus +/- Adjust the focus manually to produce clear image.

(5) Zoom +/- Zoom in and out the image.

(6) Direction buttons Adjust and position the focal point of the PTZ camera.

(7) Camera ID pane Display the PTZ camera number that is being operated.

(8) Save Camera

preset position

Save the PTZ camera preset position number. Select the camera and click the preset

position number and save it.

(9) Camera lens

speed controller

Adjust the moving speed of the PTZ camera lens.

(10) Camera preset

position number

Move the PTZ camera to the preset point.

(11) Group AutoPan Select to automatically operate PTZ camera in group.

3.6 Setting Up and Using the EMAP

EMAP can hold up to 8 maps in *.bmp/*.jpg format. You may locate the camera, sensor and relay on the

map.

3.6.1 To Set Up the EMAP

1. Click EMAP.

2. When the EMAP screen appears, click the area number (1 to 8 buttons) on where you want to insert the

map.

3. Click Load Map to insert the map. When the open dialog box appears, locate and select the map and

click Open.

4. When the inserted map appears on the EMAP screen, click Edit. You may now drag the camera, sensor,

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 114 115

No comments

Avermedia SA6000E Pro User Manual Page 36