Avermedia SA6000E Pro User Manual download pdf (Page 103)

3. Specify to either schedule it weekly or one time. Click ~ to make a selection.

4. Click on the blocks to set the schedule (see also

Chapter 4.5.1). Or click All to select all. To store the

setting, click Save. To remove the settings, click Clear.

5. To end Schedule Setting, click Update to exit and accept the setting and Exit to exit without saving the

setting.

Alarm Setting

In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the

selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to

revert back to original factory setting.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

To set the Alarm Setting:

1. Click Add to insert and set a new alarm setting. Click the items in the (7) Alarm Setting List, if you want

to modify the alarm setting.

2. In (1) Alarm Setting number/Name/Description, display the selected alarm setting number in the list

below. Enter alarm name and description.

3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the time and

click the block you want to activate or deactivate the alarm function. When it is deactivated the color of

the block turns white.

4. In (3) Conditions, you can set “Trigger if any” to activate if it falls to one of the conditions or “Trigger if

all” to activate if it falls to all conditions.

- In Camera section, select and click on the camera number (01 to 16) in Motion Detected and Video

Loss to set the condition for the system to alarm.

- In Missing and Suspicious Object Detected, click the camera number (01 to 16) and select the

certain object on the screen (right click on camera number for detailed setting)), and when the certain

object is missing or doubtful, the system will alarm. (see also

Chapter 4.9.12) In Scene Change,

when the camera has been moved, the system will alarm, too.

- In Voice Detection, click the camera number (01 to 16) to the system to alarm when detect the

abnormal voice.

5. In (4) Sensor, select and click on the sensor number (use W and X to select the sensor) to set the

condition for the system to alarm. If the sensor normal status is high, set the sensor condition to low (see

Chapter 4.7 step #4 ).

- Enable/disable the Abnormal Event check box, to set the condition of the event for system to alarm.

• Normal Reboot: when the DVR system reboot without abnormal condition, the system will send

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 114 115

No comments

Avermedia SA6000E Pro User Manual Page 103