Avermedia SA6000E Pro User Manual download pdf (Page 101)

cameras, enable the ALL check box.

(3) Main Configuration

Set the Server IP and Remote Console Port number. The system will automatically detect your Server IP

address. You need this when accessing DVR server from the remote location via internet.

(4) Dynamic DNS (Domain Name System)

Enter the Domain Name and Password. To use this feature, go to http://

ddns.avers.com.tw and register.(also

see

Appendix A) You will be prompted to enter CD key number, product name, password, and user

information. Use this service if the IP address changes each time when you connect to internet.

(5) Network Video Configuration

Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust

bar to set the Quality level and FrameRate level.

(6) Webcam Port

Activate Enable Anonymous Login to remotely access the DVR server without the need of password. The

default of Web port is 80.

(7) Voice Phone

Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using microphone.

Make sure both microphone and speakers work before using this feature. If the Talk to Web-Client is

disabled, the person in the DVR server side can only hear the voice from the client side that is when the

WebCam 2-Way Talk button is activated. (See also

Chapter 7.1 #6). The default port of voice phone is 9999.

(8) Network Time Synchronization

Adjust the DVR system time same as network time server. Fill in the Time Server IP address or domain

name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.

(9) Other Configuration

- UPnP

Enable UPnP function to automatically configure the port setting on the local network. This function is

available when there is UPNP device in the same network. It will write the DVR port information into

the router or other network device (see

Appendix C)

- Enable White List

An access permit list for the remote accessing of DVR server. Enter the IP address and click Add. Or,

enter a range of IP address and click Add. To delete the IP from the list, select the IP and click Delete

button. To reset the input, click Clear button.

- Enable Handy View

Enable remote users to use a PDA or a mobile phone to access DVR server and select the video size

and quality. (See also

Chapter 7.5 and 7.6)

- Network Bandwidth Limit

By Channel: Set the network bandwidth by each channel.

All: Set the total network bandwidth consumption limit.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 114 115

No comments

Avermedia SA6000E Pro User Manual Page 101