AVerMedia® AVerDiGi EXR6004 Mini User Manual Nov. 2009
4 1.3 Front Panel Name Function (1) DVR Power LED Light when the unit is power on (2) HDD LED Indicate the hard disk running state. Light whe
94 Enable/disable audio of the camera. - Name Change the camera name - Description Add a short comment (5) IP Camera Information Click IP Setting t
95 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli
96 9.2.2.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default to
97 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco
98 9.2.2.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click D
99 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
100 9.2.2.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s
101 Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message. Abnormal Reboot: when the DVR sy
102 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to ex
103 - PTZ preset point - Position the PTZ camera based on the preset point setting. Next to the PTZ preset point check box, click Detail. In the Tr
5 1.5 Setting Up the DVR Unit 1.5.1 Installing the Hard Disk i - For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Produc
104 9.3 Remote Backup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backup
105 - Enable/disable Disk Recycle check box, to automatically overwrite the oldest file when there is not enough free space to backup the file. Manua
106 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating doma
107 Appendix B Specifications Operating system Embedded Linux Camera Inputs (IP) 4 Video Streaming Format H.264/MPEG4/ MJPEG IP Recording Res
WARRANTY NOTICE LIMITED WARRANTY AVerMedia INFORMATION, Inc. warrants this product to be free of defects resulting from faulty manufacture or compon
6 5. Secure the hard disk inside the unit then place unit cover 6. Push the cover forward and secure the cover 7. You may now connect all the
7 1.5.2 Connecting Devices The back panel of the DVR unit, user can connect the 4 sensor devices, 1 alarm device, audio input/output device and an e
8 1.5.3 Connecting the Audio, Sensor and Relay device The Sensor, Alarm, and audio port enable you to connect 4 sensor inputs, 1 relay outputs, and
9 Chapter 2 Operating the DVR unit 2.1 First Time Using the DVR Unit 1. Connect the mouse to the USB port located at front panel of the DVR uni
10 2.1.1 Using the Virtual Keyboard User can use the Virtual Keyboard when the keyboard is not available. Just click or right-click screen to cal
11 2.2 Familiarizing the Buttons in Preview Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the
12 Name Function (15) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click the arrow ico
13 2.2.1.2 To Use the Emap 1. Click E-map. 2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
14 2.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera contro
15 5. Select the Preset Number to assign a number for the PTZ camera current position. And then, click Save to save the setting. 6. Set the DwellTi
16 2.3 To Playback the Recorded Video To switch in Playback mode, click Playback button at the lower right corner of Preview mode user interface. N
17 Name Function (5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The num
18 Name Function (15) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Event Search
19 2.3.3 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialog
20 Chapter 3 Customizing the DVR System In the Preview screen mode, click button to customize your DVR. Enter the ID and password to authenticate(
21 (4) Overwrite Enable When there is not enough free space to record one hour data, the system automatically replaces the oldest data. (5) Language
22 Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle depending on the set time
23 3.2 Camera Setup Click Default will back to the factory default value. 3.2.1 To Setup the IP Camera (1)(2)(3)(4)(5) (1) Camera Icons Select the
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR I
24 1. Click the radio button of Protocol to start setup IP camera. 2. Select the Protocol, Model, Video Format, and Channel of the IP camera. 3.
25 4. The system automatically detects the camera and input relates information. In the Content section, enter sensor Description. 5. In the test s
26 3.2.2 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. (1) Camera Icons Select the camera numbe
27 - Connect Click to connect the camera when all configurations are set. 3.3 Recording Setup (1) Camera Icons Select the camera number you want t
28 3.4 Network Setup Click Default will back to the factory default value. (1)(2)(3)(4)(5)(6)(7) (1) Server Name Assign a name for the DVR unit. Alp
29 - IP: Assign a constant IP address which a real IP address gives from ISP to DVR system. - Mask: It is a bitmask used to identify the sub network
30 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
31 3.5 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 0
32 3.6 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 04 repres
33 3.6.1 Using QPlayer to Playback Backup Video You can playback the backup files using QPlayer applications on the PC. When you back up the recorde
Table of Contents Chapter 1 Introduction ... 11.1 Package C
34 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN F
35 Name Function (18) Watermark To verify the playback video has not been modified To verify the playback video doesn’t been modified. Click to ch
36 3.6.2 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau
37 3.7 Sensor Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connected
38 3.8 Relay Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connecte
39 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm settin
40 Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message. Abnormal Reboot: when the DVR sy
41 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the
42 - Start Recording Record the video from the selected camera. 1. Next to the Start Recording check box, click Detail. 2. In the Alarm Recordin
43 3.10 User Setup Only administrator level authority can access User Setting. The maximum user accounts are 32. In the User Setting dialog box, cli
3.10 User Setup ... 43Chapter 4 U
44 using internet explorer. - Remote Console Allow the user to remote modify DVR system setting. - Remote LogViewer Allow the user to view the even
45 Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphi
46 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Exit To close the applicat
47 Name Function (4) Open File To select the video file source for playing. - DVR Recorded File (HD): To playback the recorded video from the
48 Name Function (15) Split Screen Mode Select from different screen view to playback the recorded video file of the entire camera or one camera o
49 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK. 3. Locate the backup file folder and cl
50 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Adv. Function → HDD Backup on US
51 Chapter 5 ImageVerification Image Verification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot).
52 Chapter 6 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic
53 Name Function (12) Noise Reduce Adjust the softness and repair the damaged colours. (13) Sharpness Improve the overall image by enhancing edge
Chapter 9 Web Tools ... 909.1 Dispatch Server ...
54 Chapter 7 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature
55 7.1 Familiarizing the Buttons in WebViewer Right-clicking on the WebViewer video screen, enables you to start video recording, change video qua
56 Name Function (14) Select cameras to view Select to the view camera from different server. In Select Camera dialog box, Display column, click to
57 7.1.1 To Setup Remote System Setting The setting here applies to Remote DVR only. Click the selection to configure. 7.1.1.1 System Setting In th
58 - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle dependi
59 Enable/disable audio of the camera. - Name Change the camera name - Description Add a short comment (5) IP Camera Information Click IP Setting t
60 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli
61 7.1.1.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default to
62 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco
63 7.1.1.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click D
1 Chapter 1 Introduction AVerDiGi EXR6004 Mini brings you the new version of pure NVR. With Compact size, it provides 4 channel video and audio inp
64 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
65 7.1.1.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm se
66 Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message. Abnormal Reboot: when the DVR sys
67 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exi
68 - PTZ preset point - Position the PTZ camera based on the preset point setting. Next to the PTZ preset point check box, click Detail. In the Tri
69 7.2 Familiarizing the Buttons in WebViewer PTZ (1)(2)(3)(4)(6)(5) Name Function (1) Direction buttons Adjust and position the focal point of
70 7.3 Familiarizing the Buttons in Remote Console Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from 1 or 4
71 7.3.1 To Setup Remote Console Setting Click Setup button to call out the System Setting window. Click OK to exit and save the setting and Cancel
72 7.3.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera controll
73 7.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, cho
2 1.1 Package Content (1) (2) (3) (4) (5) (6) (7) (1) AVerDiGi EXR6004 Mini unit (2) Software CD (User Manual included) (3) Quick Use
74 7.4.1 Familiarizing the Buttons in Local Playback Name Function (1) Split Screen Mode Select from 1 or 4-split screen type to playback the r
75 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow
76 Name Function (13) Full screen View in Playback-compact mode. To return, press the right button of the mouse or ESC on the keyboard. (14) Event
77 7.4.2 Familiarizing the Buttons in RealTime Playback Name Function (1) Split Screen Mode Select 1 or 4-split screen type to playback the rec
78 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN F
79 7.4.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress
80 Name Function (12) Audio Enable/disable volume (13) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are captu
81 Chapter 8 Using HandyViewer to Access DVR Server Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone
82 4. When you are prompted, click Yes to install the application using the default directory. 5. When done, click OK. 8.1.2 To install PDAViewer
83 8.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name
3 - Optimized de-interlace options for dynamic or static camera scenes Recording - VGA Recording frame rate: 120/100 fps (NTSC/PAL) - Reco
84 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the popup menu will a
85 11. User can change the relay status. Select the relay and tap on video screen longer the pop up menu will appear, and then, select the status (
86 8.2.2 To Use the JavaViewer 1. Run the JavaViewer program. 2. Enter the DVR IP address, port number, user ID, and password. Please refer to yo
87 8.3 Using iPhone to Access Remote DVR Server Using the iPhone can connect to remote DVR server through the Internet to view the live image. 8.3.
88 II. Using iPhone to Download 1. Please make sure your iPhone connect to the Internet. 2. Select App Store from iPhone main screen. 3. Select Sea
89 3. After login, user should see the live video on iPhone screen. 4. Click the channel number (1 ~ 32) can switch to view each channel. 5. Click &
90 Chapter 9 Web Tools The bundled Web Tools includes Dispatch Server , Remote Backup, and Remote Setup program. To install Web Tools, place the CD
91 9.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. To install Remote Setup application, insert the Installation
92 6. When connection is lost, click Reconnect to connect again. 7. To modify or delete the added DVR server, select the DVR server from listing and
93 - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle dependi
Comments to this Manuals