AVerMedia® AVerDiGi EH5108/EH5216 series EH5108/EH5108+/EH5108 Lite EH5216/EH5216+/EH5216 Lite EH5108H/EH5216H series EH5108H/EH5108H+/EH5108H L
4 1.1.4 EH5216H series a b c (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) DVR unit a. EH5216H b. EH5216H+ c. EH5216H Lite (2) AVerMe
94 6.1.1.2 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and appl
95 (5) IP Camera Information To setup IP camera and display current IP camera information. IP Setting: Click IP setting to add the IP camera. 1.
96 Analog Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and apply
97 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting windows, click Update to save and apply the new settings, cl
98 Enter the user id that for connecting authority - Password Enter the password that is for connecting authority - Channel Select the channel of c
99 Record the video from the selected camera and save it to the designated storage path - Motion Recording Start recording the video from th
100 Record Setting of Analog Camera i EH5108/EH5108H/EXR5008 series only has 8 channels will be available. (1)(2)(3)(4)(5)(6)(7) (1) Camera Icons Sel
101 Stop Record After settings. - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and
102 6.1.1.2 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click
103 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
5 1.1.5 EXR5008/EXR5016 series a b c (1) (2) (3) (4) (5) (6) (7) (8) (1) DVR unit a. EXR5008/EXR5016 b. EXR5008+/EXR5016+ c. E
104 6.1.1.3 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm
105 6. In (5) Sensor, select and click on the sensor number to set the condition for the system to alarm. If the sensor normal status is high, set
106 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the
107 - Start Recording Record the video from the selected camera. i EH5108/EH5108H/EXR5008 series only has 8 channels will be available. Beside the
108 6.2 Familiarizing the Buttons in WebViewer PTZ (1)(2)(3)(4)(6)(5) Name Function (1) Direction buttons Adjust and position the focal point of
109 6.3 Familiarizing the Buttons in Remote Console (1)(2)(3) (4) (5) (6) (7) (8) (9)(10)(11)(12)(13)(14)(15)(16) Name Function (1) DirectDraw Enh
110 6.3.1 To Setup Remote Console Setting Click Setup button to call out the System Setting windows. Click OK to exit and save the setting and Cance
111 6.3.2 Familiarizing the Buttons in PTZ Camera Controller (1)(10)(2)(3)(4)(5)(6)(7)(8) (9) Name Function (1) Close Exit PTZ camera controller. (2
112 6.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, ch
113 video thumbnails. In the Time Selection screen, click on the video thumbnail you want to download (see also Chapter 6.4.3). 6.4.1 Familiarizing
6 1.2 Front Panel 1.2.1 EH5108 Lite/EH5108H Lite/EH5216Lite/EH5216H Lite EXR5008 Lite/EXR5016 Lite Name Function (1) System Power indicato
114 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow
115 7. To adjust Video Quality if needed. 8. And, select the Optimize for speed for faster file opened. For saving storage, select Optimize for sto
116 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow
117 6.4.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress
118 Using HandyViewer to Access DVR server Chapter Users can use a mobile phone to access the DVR through Internet. Make sure your mobile phone s
119 7.1.2 To Install PDAViewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP. Then
120 7.1.3 To Use the PDAViewer 1. Run the PDAViewer on your PDA. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name Fu
121 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the pop-up menu wil
122 11. User can change the relay status. Select the relay and tap on video screen longer the popup menu will appear, and then, select the status (O
123 7.2 Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure yo
7 Name Function (9) Call out system setup menu on preview mode (10) Control Buttons Move to left direction on menu control To move PTZ camera lens
124 7. The JAVAViewer support PTZ control function, you can refer to Help file for detail function control key. Select menu and go the way down to s
125 Using the Web Tools Chapter The bundled Web Tools includes Dispatch Server, Remote Backup, and Remote Setup
126 8.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. To install Remote Setup application, insert the Installatio
127 setting and click Delete to remove the DVR server. 8. User also can import the setting by clicking Import button. To save the setting to local ha
128 Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle depending on the set time
129 8.2.2.2 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and app
130 To setup IP camera and display current IP camera information. IP Setting: Click IP setting to add the IP camera. 1. Click the radio button of
131 Analog Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and apply
132 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting windows, click Update to save and apply the new settings, c
133 - User ID Enter the user id that for connecting authority - Password Enter the password that is for connecting authority - Channel Select the
8 Name Function (12) A functional key for multiple system control. Press to switch to FN mode (The word “FN” will show up in the left bottom cor
134 The recording modes are listed below: - Always Recording Record the video from the selected camera and save it to the designated storage pat
135 Record Setting of Analog Camera i EH5108/EH5108H/EXR5008 series only has 8 channels will be available. (1)(2)(3)(4)(5)(6)(7) (1) Camera Icons Sel
136 and Stop Record After settings. - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected
137 8.2.2.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click
138 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
139 8.2.2.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm
140 6. In (5) Sensor, select and click on the sensor number to set the condition for the system to alarm. If the sensor normal status is high, set
141 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the
142 - Start Recording Record the video from the selected camera. i EH5108/EH5108H/EXR5008 series only has 8 channels will be available. 1. Beside
143 8.3 Remote Backup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backup
9 1.2.3 EH5216/EH5108/EXR5008/EXR5016 Name Function (1) System indicator - Power indicator (left): System power status indicators. Indicate runni
144 - Click Schedule to select/unselect the time you want to backup. The red block turns white when it is unselected. - Enable/disable Disk Recyc
145 8. For manually backup, click file select button and select the DVR to backup.
146 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating doma
147 Appendix B Network Service Port The following table shows the ports that DVR server uses for certain network service. Port# Variable Remot
148 Appendix C Using Functional Keys The DVR system provides shortcut keys. The table shows the function keys and descriptions. Function Keys Descr
WARRANTY NOTICE LIMITED WARRANTY AVerMedia INFORMATION, Inc. warrants this product to be free of defects resulting from faulty manufacture or compo
10 Name Function (9) Control Buttons Move to left direction on menu control To move PTZ camera lens to left in PTZ mode Move to right direction on
11 Name Function (11) A functional key for multiple system control. Press to switch to FN mode (The word “FN” will show up in the left bottom co
12 1.3 Back Panel 1.3.1 EH5108 series/EH5108H series Name Function (1) LAN Port For Gigabit Ethernet connection (2) RS232 port For POS device co
13 Name Function (7) eSATA port For connecting with eSATA RAID (8) RS485 For analog PTZ camera connection (also see Chapter 1.6) (9) Sensor In Sup
FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may no
14 1.4 Setting Up the DVR Unit 1.4.1 Installing the Hard Disks i - For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Produ
15 5. The hard disk plate can be installed 3 hard disks. User can choose the position and place the hard disk on it. 6. Turn the plate and hard di
16 11. Screw the plate within hard disk inside the DVR unit 12. Plug the SATA cable into the left side hard disk. When user remove power cable fro
17 16. Plug the SATA cable into SATA connector on the PC board. 17. Plug the power cable to the hard disk. 18. Plug the SATA cable to the har
18 20. Push the HDD holder forward and screw hole of HDD holder will match the screw hole on the DVR unit and HDD holder should hook on the stabled h
19 1.4.2 Connecting Devices 1.4.2.1 EH5108 series/EH5108H series The back panel of the DVR unit, user can connect up to 8 cameras in combination of
20 Pen drive and external hard disk must be FAT32 format. i – All connected devices have its own power supply is necessary. – DVR unit can co
21 1.4.2.2 EH5216 series/EH5216H series The back panel of the DVR unit, user can connect up to 16 cameras in combination of analog and IP camera. Th
22 Pen drive and external hard disk must be FAT32 format. i – All connected devices have its own power supply is necessary. – DVR unit can c
23 1.4.2.3 EXR5016 series The back panel of the DVR unit, user can connect up to 16 IP cameras. The DVR unit also can connect 16 sensor devices, 4 a
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHO
24 Pen drive and external hard disk must be FAT32 format. i – All connected devices have its own power supply is necessary. – DVR unit only can
25 1.5 Sensor, Relay and RS485 pinhole allocation 1.5.1 EH series The Sensor and Alarm enable you to connect 16 sensor inputs, 4 relay outputs and
26 1.5.2 EXR series The Sensor and Alarm enable you to connect 16 sensor inputs and 4 relay outputs. Just connect the external sensor and relay pin
27 1.6 Familiarizing the Remote Control Buttons Use the Remote control to operate the DVR unit. Name Function (1) Switch to playback mode (2) S
28 Name Function (13) + : Enable/disable auto scan + : Switch to full screen i + ~ doesn’t have any functions. (14) - Switc
29 Name Function (18) Speed + : To speed up movement of PTZ camera lens Speed - :To speed down movement of PTZ camera lens (19) ~ - As a numb
30 Using the DVR Software Chapter 2.1 The Way to Operate DVR There are three ways can be managed the DVR unit: 1. Usi
31 e. When formatting is done, click OK. 5. Setup the date and time in order to have correct recording time and date. Following the below steps to
32 2.2 Familiarizing the Buttons in Preview Mode EH5216/EH5216H series UI Name Function (1) Exit - Reboot: To restart the DVR system. It is requi
33 Name Function (12) Snapshot Capture and save the screen shot in *.jpg format. i Please plug the USB pen drive to DVR server before press Snapsh
Table of Contents Chapter 1 Introduction ... 1 1.1 Pa
34 and to display the video at the upper right corner of the Emap screen. At the lower right corner of the Emap screen, it lists all the warning mess
35 2.2.2.1 Setup the Analog PTZ Camera 1. Select the channel of analog PTZ camera on Preview UI. 2. Click PTZ button from preview UI. 3. In the
36 2.2.2.2 Setup the IP PTZ Camera When IP PTZ camera has successful connected with the DVR system, user can use the PTZ function directly without
37 2.2.3 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main inte
38 2.3 Familiarizing the Buttons in Playback Mode To switch in Playback mode, click Playback button at the lower right corner of Preview mode user i
39 Name Function (6) Preview Switch to Preview mode. (7) Playback Switch to Playback mode. This allows you to view the recorded video file. (8) Statu
40 2.3.1 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau
41 2.3.3 Using Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the date. Then cli
42 2.3.4 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialo
43 Customizing the DVR System Chapter In the Preview screen mode, click button to customize your DVR. When the DVR configurat
2.2.2.2 Setup the IP PTZ Camera ... 36 2.2.3 Using Event Log
44 (2) Delete recorded data after If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after
45 5. Click + one by one to complete the adjustment. 6. To disconnect touch monitor, click Disconnect button first, and then, turn off the power o
46 (1) Name: Enter a name to identify the POS. (2) Protocol: Select the protocol. (3) Skip first: Set the number of lines you want to be removed. (4
47 (12) Login Enable the conditions in Login section you want the system to automatically carry out. - Auto Login after system boot up Execute
48 3. Select the USB pen drive if there is more than one USB storage device from drop down list. The DVR unit will auto detects the firmware. 4. Cl
49 3.2 Camera Setup The DVR system supports 8/16 cameras in combination of analog and IP cameras, only analog cameras, or only IP cameras. 3.2.1 To
50 1. Click the radio button of Protocol to start setup IP camera. 2. Select the Protocol, Model, Video Format, and Channel of the IP camera. 3.
51 Relay Setting 1. Click Relay button. 2. Click the drop-down list and select the relay ID number. 3. Enter relay name in Name column 4. T
52 3.2.2 To Setup IP Camera(For EXR series) Click Default will back to the factory default value. (1) Camera Icons Select the camera number you wan
53 7. Click the radio button of Protocol to start setup IP camera. 8. Select the Protocol, Model, Video Format, and Channel of the IP camera. 9.
6.1.1 To Setup Remote System Setting ... 92 6.1.1.1 System Settin
54 Relay Setting 1. Click Relay button. 2. Click the drop-down list and select the relay ID number. 3. Enter relay name in Name column 4. T
55 3.2.3 To Setup Analog Camera(For EH series Only) Click Default will back to the factory default value. EH5108/EH5108H/EXR5008 series only has 8
56 3.2.4 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. - EH5108/EH5108H/EXR5008 series only ha
57 - Channel Select the channel of connected camera - Connect Click to connect the camera when all configurations are set. 3.3 Recording Setup 3.3
58 - No Recording The system won’t do any recording. (3) Motion Detection Adjust the sensitivity of the motion detection. The higher the value, th
59 Automatically switch to record at the maximum frame rate setting once a motion is detected and recording time will be based on Stop Record After s
60 3.4 Network Setup Click Default will back to the factory default value. EH5108/EH5108H/EXR5008 series only has 8 channels will be available. (1)
61 - DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP addresses. Enter the IP address of DNS if it is avail
62 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.
63 3.5 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 0
1 Introduction Chapter 1.1 Package Content 1.1.1 EH5108 series a b c (1) (2) (3) (4)
64 3.6 Backup Setup i While backup, the CPU usage will be near to 100% and might slow down the DVR system response. In the Backup Setting dialog box
65 3.6.1 Using QPlayer to Playback Backup Video You can playback the backup files by using QPlayer applications on the PC. When you back up the reco
66 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI
67 Name Function (13) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Intelligent Se
68 3.6.4 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intelli
69 3.7 Sensor Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the sensor ID number. 2. E
70 3.8 Relay Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the relay ID number. 2. Ent
71 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm setti
72 - Enable/disable the Abnormal Event check box, to set the condition of the event for system to alarm. Reboot: when the DVR system reboot with
73 - Enlarge Camera View Switch to only display video in Preview mode from where the alarm is activated. a. Select the camera from drop down list t
2 1.1.2 EH5216 series a b c (1) (2) (3) (4) (5) (6) (7) (8) (1) DVR unit a. EH5216 b. EH5216+ c. EH5216 Lite (2) AVerMedia
74 - IP Camera Relay: Set to enable/disable the relay operation when the alarm is activated. - Play Warning Sound Play alarm sound. - Send E-mail
75 - Start Recording Record the video from the selected camera. EH5108/EH5108H/EXR5008 series only has 8 channels will be available. 1. Beside t
76 3.10 User Setup Only administrator level authority can access User Setting. The maximum user accounts are 32. In the User Setting dialog box, cl
77 (3) Web Viewer Enable/disable Web Viewer control right that allow the user to operate from a remote location using internet explorer. - Remote Co
78 Using the UPC to Playback Backup File Chapter 4.1 Recommended System Requirements Pentium® 4 2.4GHZ or above Windows® 2000/ XP/Vista/7
79 4.3 Familiarizing the Buttons in USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Exit Exit/Mini
80 Name Function (4) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame by f
81 Name Function (16) Intelligent Search Search the changes in the motion detector frame(see also Chapter 4.3.7). (17) Sound /Sound bar Turn on a
82 4.3.2 Playback DVR Recorded File from Hard Disk 1. Please have the hard disk which containing of recorded video data install on your PC or using
83 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK. 3. Select to open by date or by file.
3 1.1.3 EH5108H series a b c (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) DVR unit a. EH5108H b. EH5108H+ c. EH5216H Lite (2) AVerMedi
84 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Adv. Function → HDD Backup on US
85 4.3.5 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the
86 4.3.6 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text
87 iEnhance Chapter The bundled iEnhance is a video editing tool and can only be used with *
88 Name Function (14) Effects Gray Scale: convert the image into black and white (monochrome). Normalize: adjust the brightness intensity.
89 Using the Remote Programs Chapter User can use Microsoft Internet Explorer to access DVR system by entering the IP addres
90 6.1 Familiarizing the Buttons in WebViewer Right-clicking on the WebViewer video screen, enables you to start video recording, change video qua
91 Name Function (14) Select cameras to view Select to the view camera from different server. In Select Camera dialog box, Display col
92 6.1.1 To Setup Remote System Setting The setting here applies to Remote DVR only. 6.1.1.1 System Setting In the System Setting windows, click Up
93 Enable the conditions in Login section you want the system to automatically carry out. - Auto record when login Automatically start video recor
Comments to this Manuals