Avermedia NV7000H User Manual

AVerMedia® Central Management System User Manual Version 7.7 Aug. 2009

5 1.2.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768 、

95 5. For Download and Playback, the numbers from 00 to 23 represent the time in 24-hour in the Remote Playback Date/Time Selection window. The num

96 6. In the Time Selection screen, click on the video thumbnail you want to download and open (see also 5.3 Using the Download and Playback Applica

97 5.2 Using the Local Playback Application Name Function (1) Split Screen Mode Select from six (6) different split screen types to playback the r

98 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – Also,

99 Name Function (13) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second (See also Chapter 5.7). (14) Find Ne

100 5.3 Using the Download and Playback Application Name Function (1) Exit Close the player (2) Progress bar Show the progress of the file bei

101 Name Function (8) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See also Chapter 5.7) (9) Find Nex

102 5.4 Using the RealTime Playback Application Name Function (1) Split Screen Mode Select from 6 different split screen type to playback the reco

103 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – Also

104 Name Function (15) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless picture and #2,

6 Chapter 2 Software Installation This chapter describes how to install the CM3000 software. Before installing the software, make sure the Windows

105 5.7 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the dat

106 4. You may also set to search and list all the result. Just check the Output Event List box. In the Search Duration section, set the Begin Time,

107 5.9 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intellige

7 2.2 Installing the CM3000 Software in Windows XP/2000 1. Place the installation CD into the CD-ROM drive then click Install CM3000. And follow

8 Chapter 3 Using the CMS 3.1 Running the CMS Software To run the application, double-click on your PC desktop or click Start > Programs >

9 3.1.1 Using the Virtual Keyboard If the keyboard is not available, you may use the Virtual Keyboard. Just click to show the virtual keyboard. F

10 3.2 Using the CMS Application When an alarm occurred on the DVR server, the video is transmitted to the CMS and display on the main screen. The

11 Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the following: - Click Exit to close the CMS pro

12 Name Function (12) Split Screen Mode Select from 6 different split screen types to view all the cameras. It also allows you to switch and view d

13 3.3 Using the Monitor When user has setup the monitor set in Camera Setup (see also Chapter 4.3), then click Monitor to view all selected camera

14 Name Function (4) Audio Enable/disable audio. When audio is enabled, user will see the audio icon on screen, click on the audio icon (audio ic

DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, perf

15 6. To add new channels, click the DVR server to un-fold the available cameras. Drag the camera to the blank channel block that has no channel nu

16  To Add the iMatrix Server User can add more remote iMatrix Servers and select the iMaxtrix from iMatrix list. Also, user can delete and modify

17 7. To switch the iMatrix server, select the iMatrix server and click Apply. i Only can select one iMatrix server at a time. 8. To delete the iM

18 3.3.3 Live Playback the Recorded Video User can playback recorded video immediately while monitoring from the local CMS server if the recording

19 Button Function Begin: Move at the beginning of video. Slower: Play the recorded video file at the speed of 1/2X, 1/4X, 1/8X, 1/16X, or 1/32X

20 Button Function Display playback speed and recoding time. 3.3.4 Viewing the GPS Data on the Monitor If user has monitored the MOB DVR server,

21 5. Select the Video Quality to High, and then, mark the Show POS message to display the GPS data on the Monitor. 6. Click OK to save and complete

22 Viewing the GPS Data on the Google Map: Following the below steps to view the GPS data on the Google Map. 1. In the Monitor mode, right-click on

23 5. Click Setup to setup the setting of the Google Map View window. - Dialog mode: the way of the display of the Google Map View window. When

24 Simple Mode Full Mode - Map Mode: the way of display the channel of the Google ma

Manual Conventions The following conventions are used throughout this manual. The caution symbol is intended to alert the user of the importance of

25 3.4 Using the MiniCenter Viewer In Minicenter, user could configure, backup, operate the remote DVR, reset alarm and change priority of alarm, a

26 Name Function (4) Alarm Info Display alarm event information which it was defined on DVR server. User can select priority of alarm event and en

27 3.4.1 Remote Bakup Remote Backup is purely for backing up the *.dvr file from the NV DVR sever. You can select between Auto Backup and Manual Bac

28 5. The Backup Mode of DVR server will change to Manual. 6. To execute manual backup, select the file first. Click File Select and select the

29 3.4.2 Remote Setup Remote Setup is configuring DVR server from remote site. Click the Remote Setup button to call out the DVR server setup window

30 5) TV Out - AutoScan Period Set the display time gap from 3 to 10 sec. before it switches to the next camera. (6) Login Enable the conditions in

31 (8) POS Set from which camera screen to display the data from the POS equipment. To set the text flow, color format, and POS database export, cl

32 (10) Dual Monitor Enable/disable dual monitor display. Click Setting to select the dual monitor display mode.

33 3.4.2.2 Camera Setting Click Update to save and apply the new settings, click Exit to exit without saving, and click Default1/ Default2 to revert

34 You can only use this function when the Auto Brightness Control is enabled. (8) Enable Deinterlace To enhance the video quality. Set the de-inter

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ... 1 1.1 Upgrading to CMS GOLD

35 Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it records at the minimum

36 3.4.2.4 Network Setting Click Update to accept the new settings, click Exit to exit without saving, and click Default to revert back to original

37 domain name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis. Or, user can click Synchronize Time Right Now

38 3.4.2.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The n

39 9 Mirror Backup: Save a copy of all the data at the set time and specified backup path. 9 Incremental Backup: Only backup the data that are not y

40 3.4.2.6 Alarm Setting click Add to insert and set new alarm setting, click Delete to remove the selected alarm setting, click OK to exit and save

41 low . - Continue trigger duration: Set a time period for system to send out the alarm when sensor has been trigger and stay in the same status f

42 a. Select the camera from drop down list to specify which camera video to be enlarged on screen when the alarm is triggered. iii. Alarm Camera:

43 - File Transmission via FTP Upload file to remote computer thru FTP (File Transfer Protocol). 1. Beside the File Transmission via FTP check bo

44 - Send to CMS (Central Management System) Enable/disable the selected camera to send video to CMS when the alarm is activated. Beside the Send t

4.1.1.2 Center Control ... 60 4.1.1.3 Playback M

45 3.5 Using the Alarm Center User can manage live alarm event, searching the alarm event, and navigate relate parameters of monitored DVRs, camera

46 Setting window show up. 7. Click Edit Information to edit the alarm. 8. User can change Priority, State, and Operator of alarm. To enter the d

47 9. To exit, click Cancel. 10. Click Run Minicenter will call out Minicenter window(see also Chapter 3.4) 11. User can view alarm events by sta

48 3.5.2 To Search the Alarm Event User can search the alarm event by the conditions. i Alarm Search will be available when USB Dongle is installed

49  Status: select the alarm status that wants to search  Operator: select the operator that wants to search  Keyword: enter the specific wor

50 When CMS system receives same alarm event, filter will flash in red light. To minimize the filter click, click to close the filter. The result

51 Clicking Image Log button to view alarm image. The image log window will show up. Double-click on the image log will call out the MiniCenter wind

52 3.5.3 To Navigate the Alarm Information User can view information of DVR, alarm, filter, and user. i Navigation function will be available when

53 To delete the filter, select the filter and click Delete. To modify the filter, click Edit. Select the filter and click Display filter can call o

54 Chapter 4 Customizing the CMS System In the CMS application, click the button to customize the CMS system. In the Authorization dialog box, e

1 Chapter 1 Introduction The AVerMedia® CM3000 is a central monitoring system that enables user to monitor up to 1000 DVR servers (see also Chapter

55 4.1 System Setting In the System Setting dialog box, click OK to accept and start to reload the new setting, and Cancel to exit without saving. (

56 5. In the System Setting dialog box, click OK to start reloading the new setting and Cancel to exit without saving the new setting. (3) Miscella

57 Enable – Mark the check box to enable the System Controller function. Model – Select model of the System Controller. Port – Select the com port t

58 Customize the system to display the tool tips and dialogs based on the selected language. By default the set language is in English. 1. Click Setu

59 4.1.1 Using the System Controller 4.1.1.1 General Function Description /ESC▲ Exit the current mode. REC O RD Switch control to monitor screen. P

60 Function Description 0 Number Button 0 EN TER An enter key for confirming a action 4.1.1.2 Center Control Function Description EM AP Switch con

61 Function Description EN TER An enter key for confirming a action 4.1.1.3 Playback Mode Function Description UUP Go up to the selection ( DVR

62 Function Description 4/ channel 4 Switch to a 16-split screen mode 5/ channel 5 Switch to a 8-split screen mode 6/ channel 6 Switch to a 13-split

63 4.1.1.4 E-Map Control Function Description To exit from E-Map screen / DVR watch window Back up last level of E-Map 1/ Channel 1 in DVR watch

64 4.1.1.5 Monitor Control Function Description To exit from Monitor screen 1/ Channel 1 2/ Channel 2 3/ Channel 3 4/ Channel 4 5/ Channel 5 6/ Ch

2 1.1 Upgrading to CMS GOLD Version The CMS can be upgraded by installing a USB software License (USB Dongle). After installed the USB dongle, CMS

65 4.1.1.6 PTZ Control Function Description / Adjust the focus in manually / To speed up the movement of camera /A-B Adjust the focus out manually

66 Function Description 9 Keyboard Number button 9 0 Keyboard Number button 0 UUP / V DOWN Tilt up and down Y LEFT / Z RIGHT Pan left and right Tu

67 7. In CMS system, enter the API key and click OK. 8. How to use the Google map function, please refer to Chapter 4.1.6.1.

68 4.2 DVR Setup Display the list of all DVR servers. User may add up to 1000 DVR servers, delete and modify the DVR setting. i To upgrade the CMS t

69 4.3 Camera Setup Select the camera from different DVR servers in order to monitor on same screen. The selected cameras will be played on Monitor s

70 11. After the Monitor set has been created, select the DVR server. And then the cameras of the DVR server will display on the Camera Select wind

71 15. In Monitor Layout window, user also can set the channel for specific type functions instead of added cameras from DVR servers. In Monitor

72 In the Monitor screen, user can right-click and drag the camera to the hotspot channel for enlarge viewing. z Sequence: Set the selected channe

73 z Matrix: set the selected channel to receive and display the alarm event from selected DVR servers. Click Setup to select the DVR servers. Enabl

74 4.4 Schedule Setup Schedule to record or backup of all the cameras either weekly or one time. 1. Select the Monitor set for scheduling. i The M

3 1.2 Dual Monitors setting Video configuration is different for each different VGA chipsets. Please follow the steps below to setup the dual monit

75 4.4.1 To set schedule at a specific portion of time in that hour: 1. Right click the colored blocks. 2. In the Select time dialog box, click

76 4.5 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represe

77 6. Enable Include player when backup that will included a Qplayer program for playback backup file in backup folder when backup. Only administrato

78 4.6 E-MAP Setup Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map on another map. User also may

79 (12) (11) (10) (9) (8) (7) (6) (5) (4)(3)(2)(1) i Right-click on Emap could call out a short-cut menu.

80 4.6.1.1 Add a New Map 1. Click button 2. In the Authorization dialog box, enter the administrator User ID and Password 3. Click E-Map button 4.

81  Use Google Map i The Google map function only supported in CM3000 Gold version. 1. Click Setting and New map window will show up. 2. Select Us

82 4.6.1.2 Add a DVR Server 1. Click button 2. In the Authorization dialog box, enter the administrator User ID and Password 3. Click E-Map button

83 4.6.1.3 To Use the E-Map When the alarm has been activated, the DVR icon blinks and turns red. 1. On the CMS main application, click E-map or p

84 5. To stop the DVR server icon from blinking, right-click and select Reset Alarm or Reset Alarm (all). The DVR server icon will stop blinking. 6

4 4. Select the Extended Desktop and then click Finish. 5. If user selected the Advanced mode, click the View button. 6. In Display Manager, right

85 7. To setup the E-Map, click button or right click the mouse button and select E-Map setup and the E-Map interface will switch to the E-Map setu

86 4.7 Alarm Setting In the Alarm Setting dialog box, just select and enable the condition for the system to alarm and the action for the system to p

87 4.7.1.1 To Setup the Call Out List To use this feature, the PC must have a voice modem connected to it. The supported audio system is only 8KHz a

88 4.7.1.2 To Setup the Send E-Mail Setting Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and sa

89 4.7.1.3 To Setup the Alarm Sound Setting 1. Beside the Play Warning Sound check box, click Detail. 2. In the Alarm Sound Setting dialog box, c

90 4.7.1.5 To Set the MMS/SMS Setting To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Bes

91 4.7.1.6 Popup Video The Popup video will co-work with alarm condition of Receive Alarm. When user selects the alarm condition of Receive Alarm, an

92 CAM 01 CAM 02 CAM 03CAM 04 CAM 05 CAM 06CAM 07 CAM 08 CAM 09 (b) To nail popup video window for avoiding new coming alarm video to replace it. (c)

93 4.8 User Setting CMS supports 256 user account that includes operator and administrator account. 1. Select the Authorization Level – Operator or

94 Chapter 5 Using the Playback Function User can choose to playback video stored on the local hard disk or download the video from the remote side